Virtual Machine Management

To manage virtual machines and networks navigate to the following path:

Click on Service Management link. Select Virtual Machine Management tab:

You can perform the following three Machine Operations:

• Turn Off: Clicking on this button it will turn off the machine.

• Hard Reset: Clicking on the button will reset the all the machine operations.

• Suspend: Clicking on this button will suspend the VPS machine.

You can see the virtual machine settings under Virtual Machine Settings section:

You can also add IP address and DNS address by clicking on the Add IP Address and Add DNS Address buttons respectively.

• Virtual Machine Name: It displays the virtual machine name.

• Machine State: It shows the state of the machine whether On or Off.

• Memory (RAM): It displays the size of the memory in MB. You can also change your memory by clicking on Change button.   

• CPU Cores: It displays the no of CPU cores. You can also change your the no of CPU cores by clicking on Change button.    

• Boot From CDROM: It shows the CDROM to boot from.

• Snapshot Limit: You can change the snapshot limits by clicking on the Change button.

You can also manage virtual networks under Network Management section:

• Address: It displays the IP address. To remove an IP select address from the list and click on Remove IP Address button.

• DNS Address: It shows the DNS address. To remove the DNS address select it from the list and click on Remove DNS Address button.

• VLAN ID: It shows the VLAN ID for e.g.10. You can also change your VLAN ID by clicking on Change button.   

• Gateway: It shows the gateway address.

• Subnet Mask: It shows the subnet mask.

©2014. All rights reserved.