Adding IP Pool

To add IP Pool navigate to the following path:

Click Add IP Pool button. The add IP pool screen shows following:

• Identification: Enter a friendly name for this IP pool. Example: Gold_Reseller_Block_C.

• Hardware node: Select the hardware node where the IPs are routed. The servers in this list come from Server Groups. See

• Automatic IP collection: Check if you want to enable.

• Enabled: Checked.

Click Save button when you are done.

Note: This procedure creates IP address pool and attempts to setup IPs on the hardware node too. Appropriate success/failure message will show.

©2014. All rights reserved.