Add Server Group

To add a server group navigate to the following path:  

 And then click on Add Server Group button you will land to the following path:

Fill in the following fields for server group to be added:

• Server Group Name: Enter the name of the server group. This is friendly name.

• Fill Style: Select from

• Least Filled First: In case there are multiple servers with same service under the server group, one that has lower number of services provisioned will be used for new provisioning.

• One-By-One: In case there are multiple servers with same service under the server group, new service will be provisioned one by one on the servers regardless of the number of existing service provisioned.

• Automatic provisioning: Check or Uncheck for enable or disabling the automatic provisioning. Items will queue automatically for provisioning if this option is enabled.   

• Enabled: Tick means Yes.

Click on Next button.  

In Step 2, you will enter server information where actual provisioning will be done. Following fields will be displayed which you need to fill in to add a server:

• Reference Id:  Enter your reference id. This is friendly name for server.

• Datacenter:  Select name of the datacenter e.g. Verio.NET

• Rack: Select rack name.

• Switch: Select switch name.

• Server IP: Enter server IP address where you want the services to be provisioned. Services will need to be configured once this step of adding the server is completed.

• Administrator login: Enter login. Usually default server admin user Administrator is used as it has all the rights to deploy services successfully.

• Administrator password: Enter password of the server admin.  

• Confirm administrator password: Retype password.    

Click on Finish button when done.

©2014. All rights reserved.